Ironworker - Metal Building Systems Erector
Ironworker – metal building systems erectors fabricate, construct and join scaffolding. They are limited to work on one-story, steel framed metal buildings generally referred to as pre-engineered buildings.
They erect pre-engineered buildings and sometimes perform reconstructive work on existing structures.
In general, metal building systems erectors:
- read blueprints and specifications to lay out the work
- unload and stack steel units so each piece can be hoisted as needed
- erect and install scaffolding, construction cranes, derricks and other hoisting equipment
- assemble rigging (cables, pulleys, hooks) to move materials
- attach cables from a crane or derrick and direct crane operators with hand signals or radios
- position steel units, align holes and insert bolts
- assemble and erect pre-fabricated metal structures
- check the alignments and join steel parts by bolting them.
For more information regarding tasks and activities, please review the Trade Regulation.
Ironworkers – metal building systems erectors generally work outdoors in teams or crews in remote locations as well as urban areas. Their work is physically strenuous and may be dangerous. They must rely on each another to use good judgment as well as safety equipment and procedures to reduce the risk of injury from falling or from falling objects. Adverse weather conditions such as rain, snow or high winds can shut down projects for days at a time.
Successful ironworker – metal building systems erectors enjoy developing their expertise by doing precise work in a broad range of industries and locations. They enjoy the outdoors and often like travelling and working with different crews.
To be successful in their trade, ironworker – metal building system erectors must have:
- the ability to interpret blueprints
- an understanding of safe work practices and the knowledge to safely operate the tools of the trade
- to be able to work at heights
- the strength, stamina, and ability to use proper lifting techniques to lift items weighing in excess of 25 kilograms
- very good muscular coordination, agility and balance
- a willingness to travel to various work sites
- an inclination to work cooperatively with others
- the ability to act quickly and decisively in emergencies.
Most ironworker – metal building systems erectors are employed by construction contractors, but some are employed in industries such as metal fabricating, oil and gas production, iron and steel production, electric utilities and rail transport. Very few ironworker - metal building systems erectors are self-employed. In the construction industry, ironworker - metal building systems erectors work on a project-to-project basis and frequently travel long distances from job to job.
Employment is seasonal, and employment prospects change with the economic climate, particularly with the volume of commercial and industrial construction projects.
Journeyperson wage rates vary, but generally range from $20 to $30 an hour, plus benefits.
Experienced ironworker - metal building systems erectors may advance to supervisory positions such as foreman and construction superintendent.
To work as an ironworker - metal building systems erector in Alberta, a person must be a registered apprentice, an Alberta-certified journeyperson, or hold a valid recognized credential.
Metal building systems erectors learn their skills by registering with Alberta Apprenticeship and Industry Training to participate in apprenticeship training. Upon successful completion, they are awarded the Alberta Journeyman Certificate.
A metal building systems erector who holds a valid recognized credential that does not have a Red Seal may apply for:
- an Alberta trade certificate under the Qualification Certificate Program
- an Alberta Equivalency document under the Equivalency Program.
Metal building systems erectors who:
- hold a credential that is not recognized or is no longer valid in an Alberta-designated trade, OR
- can demonstrate their experience, skills and knowledge in an Alberta-designated trade, and meet the standards and requirements established by the Alberta Apprenticeship and Industry Training Board
may be eligible to apply for trade certification under the Qualification Certificate Program.
Individuals possessing a valid recognized credential in Alberta are eligible to receive a Blue Seal business credential after completing the necessary requirements.
The term of apprenticeship for an ironworker - metal building systems erector is two periods: the first period spans a minimum of 12 months and includes a minimum of 1500 hours of on-the-job training and 6 weeks of technical training, and the second period comprises of 12 months and includes a minimum of 1500 hours of on the job work experience and 6 weeks of technical training.
- An applicant who previously completed courses of study or work experience related to the metal building systems erector trade or holds a related journeyperson certificate and has the employer's recommendation, may qualify for credit that could reduce the term of apprenticeship. Inquiries about credit for previously completed courses of study or work experience can be directed to an apprentice representative toll-free at 1-800-248-4823.
- A high school student can become an apprentice and gain credits toward apprenticeship training and a high school diploma at the same time under the Registered Apprenticeship Program (RAP).
To learn the skills required of a ironworker - metal building systems erector in Alberta and be issued an Alberta Journeyman Certificate, a person must:
- satisfy the entrance requirements or pass the entrance exam (see Entrance Level Competencies, Exam Counselling Sheet, and Entrance Exam Support Materials List)
- find a suitable employer who is willing to hire and train an apprentice
Most employers prefer to hire high school graduates and may select apprentices from among their current employees.
For holders of an existing trade certificate, it can serve as your entrance requirement equivalency when registering in an additional trade.
- complete the online Apprenticeship Application and Contract
- pay the non-refundable application fee as part of the application process
- complete the required on-the-job training
- during on-the-job training, apprentice ironworker- metal building systems erectors earn at least 60 percent of the journeyperson wage rate in their place of employment in the first and 70 percent in the second period.
- complete all program requirements as identified in the course outline
- enroll in technical training
- select an educational institution that offers training for ironworker - metal building systems erector apprentices, and a time to attend training
- determine requirements for enrolling at the selected institution, and forward completed enrolment form to the selected institution
- review books and materials required for training
- successfully complete all required exams
When apprentices attend technical training, they are required to pay the applicable tuition fee and purchase course supplies.
Student loans, grants, scholarships and other financial assistance may be available. For more information see Financial Assistance, visit an Apprenticeship and Industry Training office or call toll-free to 1-800-248-4823.
The ironworker – metal building systems erector trade does not participate in the Red Seal Program.
For a Qualification Certificate based on a recognized credential or work experience in order to prepare for the exam(s) please refer to the Exam Counselling Sheets and review available resource materials.
Time spent on supervisory or foreman duties, counter work, heading the tool crib, or on training course is NOT counted as 'hands-on' work experience.
A person who holds a valid recognized credential does not require an Alberta equivalency document to work in the trade in Alberta.
However, some employers may require Alberta documentation as proof that the holder is allowed to work in the trade or that the holder's credential is recognized.
More information regarding the Equivalency Program can be found here.